Hight Frequency Resonator DIP Oscillator HC - 49S 36.000MHz 10ppm - 20ppm 20PF
product application
1 , Camera
2 , Security monitoring
product features
Working in series resonant mode, the impedance is at the lowest point, equivalent to Rs.
The crystal is usually labeled with series resistance (< 100 Ohm) instead of parallel load capacitance.
In order to achieve a high oscillation frequency, the quartz crystal oscillates at one harmonic frequency, which is an integer multiple of the fundamental frequency.
Operating Temperature Range:
-20℃~70℃
Crystal Frequency & Resistance will be tested under the following conditions,
Unless extra requirments:
standard temperature(25±2℃) after heat balance.
Mechanical test:
The quartz crystal unit shall be subjected to normal atmospheric conditions for 1hr before being tested.
Dropping Test:
The Units are measured for its frequency and resistance in accordance with Table1 & without mechanical damage,after allowing the crystal to fall freely.From 75 cm of height 3 times on the firmed wood.
Vibration Test:
A. Test surface: 30mm thick hard board;
B. Drop height: 75cm;
C. Drop times: 3 times;
D. Begins to drop posture: the leading end is upward;
E. Initial and final test items: frequency, resistance
Sealing Tightness:
Find Lead Test:≤1×10-8atm·cc/S by Helium mass-mass-spectrometer detector,and vacuum and reach 1×10-3Pa；
Resistance to Soldering Heat:
The Units are measured for its frequency and resistance in accordance with Table 1 after dipping into molten solder with the temperature of 320℃±10℃；For 3~4 secs and at a depth up to a point 2.0mm from the base root.
product advantage
The new Tianyuan in R & D, design, manufacturing, marketing and service as a whole, have a hundred grade purification workshop. The international advanced automated production lines, special test equipment, the latest technology and professional and technical personnel; has been preparing for the new Tianyuan own industrial park, to further expand the research and production of the higher requirements of the product.
Product specification
| Type | HC-49S |
| Frequency Range(MHZ) | 36.000MHZ |
| Frequency Tolerance(at25℃) | ±10PPm ,±5PPm at25℃+/-2℃ |
| Frequency Stability vs. Temp(FL-T) | ±10PPm,±20PPm ,±30PPm |
| Operating Temperature range | -20~+70℃ -40~+85℃ |
| Storage Temperature range | -45~+80℃ |
| Temperature Characteristics | ±10PPm ±20PPm |
| Load Capacitance | 8 to 20 Pf or Serles |
| Aging | ±3 PPm/year |
| Insulation Resistance | 500MΩ(DC100V±15V) |
Dimension
Refluence examination
Frequency change:≤±5ppm
FAQ
Packing
200pcs/bag .
Samples and technical support can be provided free of charge.
Product Tags:
|
|
Passive High Frequency Resonator Digital Oscillator HC - 49S 36.000MHz 10ppm - 20ppm Images
|
